12V Lithium Jump Starter ¡ª 3000A Peak. Integrated 150 PSI Cordless Tire Inflator

12V Lithium Jump Starter ¡ª 3000A Peak. Integrated 150 PSI Cordless Tire Inflator

Green
$42.99 $69.99
Skip to product information
12V Lithium Jump Starter ¡ª 3000A Peak. Integrated 150 PSI Cordless Tire Inflator
  • 12V Lithium Jump Starter ¡ª 3000A Peak. Integrated 150 PSI Cordless Tire Inflator
  • 12V Lithium Jump Starter ¡ª 3000A Peak. Integrated 150 PSI Cordless Tire Inflator
  • 12V Lithium Jump Starter ¡ª 3000A Peak. Integrated 150 PSI Cordless Tire Inflator
  • 12V Lithium Jump Starter ¡ª 3000A Peak. Integrated 150 PSI Cordless Tire Inflator
  • 12V Lithium Jump Starter ¡ª 3000A Peak. Integrated 150 PSI Cordless Tire Inflator
  • 12V Lithium Jump Starter ¡ª 3000A Peak. Integrated 150 PSI Cordless Tire Inflator
  • 12V Lithium Jump Starter ¡ª 3000A Peak. Integrated 150 PSI Cordless Tire Inflator
  • 12V Lithium Jump Starter ¡ª 3000A Peak. Integrated 150 PSI Cordless Tire Inflator
12V Lithium Jump Starter ¡ª 3000A Peak. Integrated 150 PSI Cordless Tire Inflator

12V Lithium Jump Starter ¡ª 3000A Peak. Integrated 150 PSI Cordless Tire Inflator

$42.99 $69.99
color

Description

Crank Current. Not Guesswork

This unit combines a 12V jump starter and a cordless air compressor in one lithium polymer battery housing. Output is rated at 3000A peak for 12V starting systems. with engine fitment listed up to 9.0L gasoline and 6.5L diesel. A BOOST function is included to initiate a start sequence when vehicle battery voltage is very low. Operating temperature range is listed as -4¡ãF to 140¡ãF.

12V

Two Circuits. One Box

Jump starting is handled through the included clamp cables connected to the vehicle's 12V battery terminals. The air compressor uses a digital pressure gauge with selectable units (PSI. BAR. KPA) and automatic shutoff at the set pressure. Maximum inflation pressure is listed at 150 PSI (10.3 bar). with airflow listed at 35 L/min. Preset inflation modes and a manual target-pressure mode are provided. using the included hose and nozzle set.

12V

Connect. Set. Store

For jump starts. connect the clamp cables to the unit. attach them to the battery terminals. then follow the on-unit start sequence. including BOOST when required. For inflation. thread the hose onto the compressor outlet. attach to the tire valve stem. select a pressure unit. set the target pressure. and run the motor until shutoff. Store the unit. the clamp cables. hose. and nozzle adapters in the included carrying bag. Recharge uses the included USB-A to USB-C cable.

Product Benefits:

  • 12V System Use: For 12V vehicle electrical systems using the included clamp cables.
  • Engine Fitment Range: Listed for up to 9.0L gasoline and 6.5L diesel starting systems.
  • Compressor Target Shutoff: Digital gauge with selectable units (PSI. BAR. KPA) and automatic shutoff at the set pressure.
  • Inflation Output Listing: Inflator rated up to 150 PSI (10.3 bar) with airflow listed at 35 L/min.
  • Storage and Recharging: Stores with clamp cables. hose. and adapters in the carrying bag; recharges by USB-A to USB-C cable.

Specification:

  • Battery chemistry:?Battery cell type lithium polymer.
  • Dimensions: 4.96 ¡Á 5.87 ¡Á 2.30 in?
  • Weight: 3.58 lb
  • Power Source: Internal rechargeable lithium polymer battery
  • Output: 12V jump-starting output
  • Operating Range or Capacity:?Peak output current 3000A; inflator max 150 PSI (10.3 bar); airflow 35 L/min; operating temperature -4¡ãF to 140¡ãF; 1000+ charge cycles listed
  • Connection Type: Battery clamp jumper cable; inflation hose with valve interface and nozzle adapters; USB-A to USB-C cable
  • Placement or Use Area: Interior cabin or trunk for storage; exterior access at battery terminals and tire valve stem

You may also like